Connex ®

The Connex® Junction
Lateral connections can be quickly and simply made to the main sewer on new or existing plastic pipes. Now the junction has an integral adjustable socket allowing movement in all direction from 0º to 11º.

The CONNEX®-Junction thus complies with the requirements of ATV - DVWK - A 139, according to which "Lateral pipes must be manufactured and connected so that they can allow for movement. Possible settlement and the loadings this can impose in the area of the joint must be allowed for."

The use of the CONNEX®-Junction considerably simplifies conventional working methods:

• Exposing a metre wide section of the main sewer for the subsequent connection of pipes is no longer necessary.
• The pipe bed remains untouched during the assembly work.
• The installing of pre-formed junctions with couplers after cutting the main sewer is also done away with.
• The precise, quick fitting saves time and money.

Advantages of Connex®

• Designed especially for new connections
• Pipe joints can be adjusted from 0º to 11º
• Can be connected to smaller pipes using reducers
• Complies with the requirements of ATV-DVWK-A 139
• Variable adaptation to wall thickness from 3.0 – 31.8 mm
• Ideal for pre or post construction connections
• Particularly suitable for areas prone to subsidence or increased ground movement
• Vast savings on installation due to reduced excavation
• No flow disruption to pipe as can be installed on live main
• Vast cost saving against existing junction insertion methods of sewer connections
• Variable connection to pipes with diameter DN 200 – 1500
• Pressure tested to 0.5 bar
• No disruption to pipe bedding during installation
• Easy quick installation of the lateral pipes due to the adjustable socket