Golpla ®

Golpla® is a rigid, high quality plastic grass reinforcement and erosion control system. Golpla® grass pavers are designed to perpetuate the growth of grass under conditions of intensive vehicular or pedestrian traffic.

Golpla®'s configuration of hexagonal grass paver cells, coupled with the use of High Density plastics, enables a reduction of wall thickness resulting in a high-strength grass reinforcement structure, which is visually unintrusive: 94% of the surface area is available for infill. Golpla® is not affected by extremes of temperature, is UV stable and non-toxic enhancing the grass protection properties of product.

Typical Applications of Golpla® Grass Reinforcement

• Car Parks
• Helicopter Landing Pads
• Fire Access Roads
• Caravan Site Access Roads
• Wheelchair Access and Pitches
• Footpaths
• Highways Applications (approved by the Highways Agency)
• Grass Verges
• Canal Towpaths
• Bank Stabilisation

Golpla® Surface Reinforcement Basework for Grass

Design of the base for grass reinforcement is a correlation of the loads to be carried and prevailing ground conditions. Suitable for both 'Greenfield' and 'Brownfield' sites, the base will consist typically of 150mm thick layer of well compacted stone (must be free draining; M.O.T. Type 1 is not normally suitable) followed by 80-100mm layer of rootzone (see below : Successful Grass Growth), upon which the Golpla® permeable parking material is laid, consolidated with a vibrating plate, loose filled with either rootzone or clean friable top soil and seeded to provide sustainable paving. It is important not to overfill the grass paver or to compact the soil within it.

Golpla® Surface Reinforcement Basework for Gravel Porous Paving/Stone Retention

Subject to loading and ground conditions, the base would typically be 200mm of well compacted stone for gravel porous paving, with sand blinding followed by Golpla® plastic grass paving. The gravel/stone filling for sustainable paving should be 10mm particle size or less.

Golpla® Grass Reinforcement is Available in a Range of Colours

To cater for specific aesthetic requirements, Golpla® plastic grass paving is available to order in a range of colours including Rustic, Dark Grey, Light Grey, Buff or Black.

Successful Grass Growth

Good grass requires a minimum of 125mm of growth medium in which to thrive. Hoofmark (UK) Ltd uniquely recognises this fact by the inclusion of a layer of rootzone, beneath the grass paving system.

Only Golpla® sustainable paving has sufficient footprint to enable grass protection and at the same time remain stable. Without an adequate depth of growth medium (ie rootzone plus the depth of the paver), grass cannot survive prolonged dry weather. In the case of permeable parking material, this problem is further compounded by the shelter of parked cars.

Golpla® Pregrown Permeable Parking Material

Uniquely within the grass reinforcement industry, the substantial 'footprint' and enclosed perimeter cells of Golpla® plastic grass paving, enable Hoofmark (UK) Ltd erosion control specialists to supply grass pavers Pregrown with established grass for sustainable paving situations.

Pregrown plastic grass paving is produced to order by a leading turf grower. Golpla® Pregrown plastic pavers provides instant sustainable paving for erosion control in environmentally sensitive areas, commercial refurbishments etc. See our Fastlay® page for questions about pregrown Golpla® Fastlay® Pregrown.

Accessories for Golpla® Grass Pavers

These accessories extend the versatility of Golpla® sustainable paving.

Car Park Demarcation

Clip-in hexagonal inserts are available for car park demarcation in white and yellow. These are not removable after installation.

Slopes and Lateral Restraint Erosion Control

Golpla® nails, 250mm long, and manufactured from HDPE are available for retention on slopes in excess of 1:20 for erosion control and for lateral restraint in the case of gravel retention for gravel porous paving.